LazyBear

Indicator: Intrady Momentum Index

The Intraday Momentum Index ( IMI ), developed by Tushar Chande, is a cross-breed between RSI and candlestick analysis. IMI determines the candle type that dominated the recent price action, using that to pinpoint the extremes in intraday momentum.

As the market tries to bottom after a sell off, there are gradually more candles with green bodies, even though prices remain in a narrow range. IMI can be used to detect this shift, because its values will increase towards 70. Similarly, as the market begins to top, there will be more red candles, causing IMI to decline towards 20. When the market is in trading range, IMI values will be in the neutral range of 40 to 60.

Usually intraday momentum leads interday momentum. QStick can show interday momentum, it complements IMI . You will find it in my published indicators.

I have added volatility bands based OB/OS, in addition to static OB/OS levels. You can also turn on IMI Ehlers smoothing. BTW, all parameters are configurable, so do check out the options page.

List of my other indicators:
- - Google doc: https://docs.google.com/document/d/15AGC...
Ta bort från favoritskript Lägg till som favoritskript
//
// @author LazyBear 
// List of all my indicators: https://www.tradingview.com/v/4IneGo8h/
//
study("Intrady Momentum Index [LazyBear]", shorttitle="IMI_LB")
length=input(14, "IMI Length")
lengthMA=input(6, "IMI MA Length")
obLevel=input(70, "IMI static OB level")
osLevel=input(20, "IMI static OS level")
mult=input(2.0, title="Volatility Bands Stdev Mult")
lengthBB=input(20, title="Volatility Bands Length")
applySmoothing=input(false, "Smooth IMI")
lowBand=input(10, "Smoothing LowerBand")
PI=3.14159265359
EhlersSuperSmootherFilter(price, lower) =>
	a1 = exp(-PI * sqrt(2) / lower)
	coeff2 = 2 * a1 * cos(sqrt(2) * PI / lower)
	coeff3 = - pow(a1,2)
	coeff1 = 1 - coeff2 - coeff3
	filt = coeff1 * (price + nz(price[1])) / 2 + coeff2 * nz(filt[1]) + coeff3 * nz(filt[2]) 
	filt

gains=iff(close>open,nz(gains[1])+(close-open),0)
losses=iff(close<open,nz(losses[1])+(open-close),0)
upt=sum(gains,length)
dnt=sum(losses,length)
imi=applySmoothing ? EhlersSuperSmootherFilter(100*(upt/(upt+dnt)), lowBand) : 100*(upt/(upt+dnt))
basisx=ema(imi, lengthBB)
devx = (mult * stdev(imi, lengthBB))
ulx = (basisx + devx)
llx = (basisx - devx)

// Uncomment if you want more bands
//hline(90)
//hline(10)
hline(obLevel)
hline((obLevel+osLevel)/2, linestyle=dotted)
hline(osLevel)
plot(imi, color=red, linewidth=2)
plot(imi>=ulx? imi : na, color=green, style=cross, linewidth=3 )
plot(imi<=llx? imi : na, color=maroon, style=cross, linewidth=3 )
plot(ema(imi, lengthMA), color=blue)
List of my free indicators: http://bit.ly/1LQaPK8
List of my indicators at Appstore: http://blog.tradingview.com/?p=970

Kommentarer

Bravo, always good to see your published charts. Have all your published charts linked in my Indicator list.
+1 Svara
LazyBear QuantitativeExhaustion
Thanks.

Yes, all my indicators are listed there (except this, ofc). I usually update that list every week or so. For a much cleaner list, use the Google docs link.
+1 Svara
In the case where you have two indicators, we can not add both indicators, only the first one listed. When we had the share chart "make it mine" tab, we could copy both indications.
Svara
LazyBear QuantitativeExhaustion
I know, I have requested this feature to @admin/team. Till then "Make mine" is our friend :)
+1 Svara
Glad you did, Team of great programmers here at TV
Svara
//
// @author LazyBear
// List of all my indicators:
//
study("Intrady Momentum Index ", shorttitle="IMI_LB")
length=input(14, "IMI Length")
lengthMA=input(6, "IMI MA Length")
obLevel=input(70, "IMI static OB level")
osLevel=input(20, "IMI static OS level")
mult=input(2.0, title="Volatility Bands Stdev Mult")
lengthBB=input(20, title="Volatility Bands Length")
applySmoothing=input(false, "Smooth IMI")
lowBand=input(10, "Smoothing LowerBand")
PI=3.14159265359
EhlersSuperSmootherFilter(price, lower) =>
a1 = exp(-PI * sqrt(2) / lower)
coeff2 = 2 * a1 * cos(sqrt(2) * PI / lower)
coeff3 = - pow(a1,2)
coeff1 = 1 - coeff2 - coeff3
filt = coeff1 * (price + nz(price)) / 2 + coeff2 * nz(filt) + coeff3 * nz(filt)
filt

gains=iff(close>open,nz(gains)+(close-open),0)
losses=iff(close<open,nz(losses)+(open-close),0)
upt=sum(gains,length)
dnt=sum(losses,length)
imi=applySmoothing ? EhlersSuperSmootherFilter(100*(upt/(upt+dnt)), lowBand) : 100*(upt/(upt+dnt))
basisx=ema(imi, lengthBB)
devx = (mult * stdev(imi, lengthBB))
ulx = (basisx + devx)
llx = (basisx - devx)

// Uncomment if you want more bands
//hline(90)
//hline(10)
hline(obLevel)
hline((obLevel+osLevel)/2, linestyle=dotted)
hline(osLevel)
plot(imi, color=red, linewidth=2)
plot(imi>=ulx? imi : na, color=green, style=cross, linewidth=3 )
plot(imi<=llx? imi : na, color=maroon, style=cross, linewidth=3 )
plot(ema(imi, lengthMA), color=blue)


Now you must copy PINE SCRIPT and paste the entire code when you open up a new chart.
Svara
LazyBear QuantitativeExhaustion
I dont understand the question, sorry. You asking why you must copy the second indicator manually?
+2 Svara
I'm just simply informing.
Svara
Thanks.
Svara
Hem Aktie-screener Forex-screener Krypto-screener Ekonomisk kalender Hur det fungerar Diagramfunktioner Priser Tipsa en vän Ordningsregler Hjälpcenter Webbsidor och mäklarlösningar Widgets Diagramlösningar Lightweight Charting Library Blogg och nyheter Twitter
Profil Profilinställningar Konto och fakturering Hänvisade vänner Mynt Mina kölappar Hjälpcenter Publicerade idéer Följare Följer Privata meddelanden Chatt Logga ut